Browse Forums Building A New House Re: Eaves plaster board and cornice board got wet with heavy 2Nov 12, 2015 5:18 pm Owner Building at Jimboomba Woods in Logan City Qld. Blog : http://bandlnewhomebuild.blogspot.com H1 thread : viewtopic.php?f=38&t=68283 . Re: Eaves plaster board and cornice board got wet with heavy 4Nov 12, 2015 9:08 pm Owner Building at Jimboomba Woods in Logan City Qld. Blog : http://bandlnewhomebuild.blogspot.com H1 thread : viewtopic.php?f=38&t=68283 . Re: Eaves plaster board and cornice board got wet with heavy 5Nov 13, 2015 9:40 am The fibro eave linings will be ok. I would be asking that the cornice be replaced before installation as I would be concerned about mould being an issue. It is damaged as far as I am concerned, whatever product that got wet that is. If only some got wet then only some are damaged or defective. The photo is not really clear but to me it looks like twist in the cornice. Slight anticlockwise rotation at the top of the cornice and slightly clockwise at bottom should… 8 9195 The two 15mm holes are obviously not compliant. The Dept of Fair Trading would love to see this one! Do the gutters pool water after it stops raining? Although it's… 4 8388 Update from me! Couldn't find the trimmer - not sure if there isn't one simply because the eave is so narrow. Went ahead with the spring toggles and it all worked out… 7 6131 |